User`s manual

Hardware Description

1. Front Panel Configuration

1. POWER BUTTON : Press to switch between STANDBY and POWER ON modes.

2. LED indication : The LED lights up in running mode and standby mode. You can adjust LED Lighting

Time and LED Brightness. (Main Menu >Configuration>Display Setting)

3. Remote Sensor : Receives signal from remote controller.

4. MENU Button : Press to display the main menu or to move to the previous menu.

5. OK Button : Press to display the service list in non-menu mode and to select an item or confirm

in menu mode.

6. CH Up/Down button : Press to change services in normal mode, or to move highlighted-bar in menu

mode.

7. Vol Up/Down button : Press to change audio volume in normal mode or to navigate menu in menu

mode.

8. VFD Display : The VFD consist of 12-digit letter and various icons. These letters and icon display the

current status of receiver such as service name, service information and so on.

9. SMART CARD READER : Insert smart card for encrypted service access.

10. USB(Front) : Use it when connecting to external USB storage device.

11. PCMCIA : To receive pay-tv service you need a CA-Module and a smart card from the service provider.