Quick Reference Guide

ACTIVATINGRF

Pairing State

The KITA RCU shall support both IR and BLE command codes for each key. The default operating

mode when supplied and batteries are fitted is explained in the following section.

Programming Name Trigger

PAIRING_COMBO

‘Key 9 (OK)’ and ‘Key 12 (Home)’ keys pressed simultaneously and

held down for 2s

UNPAIR_COMBO

‘Key 13 (CH +)’ and ‘Key 17 (VOL -)’ and keys pressed simultaneously

and held down for 3s

Table 8.14. Pair and un-pair combos

Pairing Scenario (Guided by the STB installation screens)

The KITA RCU shall implement the pairing scenario shown in Figure 8.1. The Figure 8.1 is simply for

a reference to show various scenarios but it does not capture all possible events.

Figure 8.1. Pairing state diagram for KITA

In this scenario the RCU shall start advertising on any key press

(including standby key short press)

after RCU is powered on. The RCU shall advertise for PAIR_ADV_DURATION and then time out and

Keys that do not have a Universal function. Universal keys are ‘standby long-press’, ‘mute’, ‘volume’ and ‘input select’