User guide

FOXTEL iQ
63
❖ Rear view
An example of how your FOXTEL iQ may be connected up is shown
on page 65.
L
R
VCR SCART
TV SCART
240V 50Hz
TELEPHONE LINE
S-VIDEO OUT
AERIAL IN
RS-232
OPTICAL
AUDIO OUT
AUDIO
VIDEO OUT
INPUT 2
13/18V DC
350mA max.
COMBINED
INPUT 1
USB
5V DC
0.5A max.
DIGITAL
AUDIO OUT
RF OUT - 1
RF OUT - 2
9V DC 75mA
max.
DO NOT REMOVE COVER
NO USER SERVICEABLE PARTS INSIDE
WARNING!
power in
To connect to the power supply
Always disconnect the plug
from power supply before you
remove the power connector
from your FOXTEL iQ
TELEPHONE LINE
To connect the telephone lead
VIDEO OUT
To connect to the ‘video in’ phono
(RCA) connector on your TV, video
recorder or home cinema
TV SCART
To connect to your TV
(usually via a FOXTEL supplied
lead, for example SCART to
SCART or SCART to phono)
INPUT(S)
To connect the cable
signal input or
satellite signal inputs*
VCR SCART
To connect to your video
recorder (usually via a
FOXTEL supplied lead, for
example SCART to SCART
or SCART to phono)
AERIAL IN
To connect the lead
from your TV aerial
RF OUT - 1
To connect an RF
lead to your TV
(or video recorder)
DIGITAL AUDIO OUT
To connect to a digital co-axial audio
(electrical S/PDIF) input on your
home cinema, TV, video recorder or
stereo sound equipment
OPTICAL AUDIO OUT
To connect to a digital optical
audio (S/PDIF) input on your
home cinema, TV, video recorder
or stereo sound equipment
USB
For future use
RS232
For future use
S-VIDEO OUT
To connect to the S-Video
input on your TV, video
recorder or home cinema
RF OUT - 2
To connect an RF
lead to a second TV.
AUDIO L + R
To connect to the left and right
audio phono (RCA) connectors on
your TV, video recorder, home
cinema or stereo sound equipment
VENTILATION SLOTS
Do not block!
* Cable and satellite inputs
The number of signal inputs on your FOXTEL iQ
depends on whether it is for cable or satellite signals.
The satellite FOXTEL iQ (shown on this page) has two
signal inputs. You must connect a signal cable to both of
these. However the cable FOXTEL iQ (shown in the
connection diagram on page 65) has only one signal
input as it requires one connection only.
Your FOXTEL iQ