User guide

56
Using your FOXTEL iQ
Setup
4:3 Programme
Display
(Setting for how
standard (4:3)
programmes display on
a widescreen (16:9) TV
- only available if the TV
Type has been set to
16:9)
Pillar Box * The whole of the picture displays, as if it were on a standard TV, with
black bars at either side of the picture.
14:9 The picture displays slightly enlarged, so it fills more of the screen, but is
slightly cropped at the top and bottom. Note: some programmes are
transmitted in a 14:9 format, with black borders included at the top and
bottom. In this case, only the transmitted borders are cropped so you
do not lose any of the TV picture.
Stretch The whole of the picture displays, stretched sideways to fill your TV
screen.
Video output PAL* If your system is connected via RF leads, you should select this setting.
RGB If your system is connected via SCART to SCART leads, you should
select this setting for a better quality picture.
S-Video For improved picture quality to S-Video equipment, such as a video
recorder, you may wish to select this setting.
YUV This setting gives improved picture quality to equipment that supports
component video (Y Cr Cb). If your system is connected via SCART to
component-video leads, you should select this setting.
Banner timeout 1 sec, 5 secs*,
10 secs
Select your preferred setting for the length of time that the i-search
banner displays on-screen when you change channel.
Closed Captions On, Off * Select whether or not you want Closed Captions to be displayed when
they are available.
Item Settings Comments