User guide

Using your FOXTEL iQ

❖ Manual recording

Some channels, for example radio channels, do not provide

programme listings in the i-search banner or TV Guide. However, you

can still use your FOXTEL iQ to record these channels, by using the

Setup screens to set up the recording.

◆ First, press the active button on your remote control to display

the Active menu, then press D to highlight ‘System Setup’ and

press select. The Setup screen displays (see also page 43).

◆ Press D to highlight ‘Manual Recording’ then press select. The

Manual Recording screen displays.

You set up the recording as follows:

1. Choose the channel to record, by either using the number

buttons to enter a channel number, or by using L or R to look

through the channel names.

2. Press D to highlight ‘Day’, then use L or R to select the day on

which you want to record the channel you have chosen.

3. Press D to highlight ‘Start Time’, then use the number buttons

to enter the time you want the recording to start. You should

use the ‘12-hour clock’, then use L or R to choose AM or PM.

For example, to record from 7:30 in the evening, enter ‘0 7 3 0’

then choose ‘PM’.

While ‘Start Time’ is highlighted, if you make a mistake, you can

press back to delete the numbers you have entered and start

again.

4. Press D to highlight ‘End Time’, then, in the same way as you

entered the Start Time, use your remote control to enter the

time you want the recording to ﬁnish.

Recording programmes