Datasheet
333
MK182
VM136:
p39
Mini kits
MK111
Applications : announce visitors, warn against burglars, set
boundaries, science projects...
• audible (85dB) and visible (LED) alert
• range: 1 to 4m (3.3ft to 13ft)
• on/off switch provided
• power supply:
• transmitter: 9VDC / 50mA max.
• receiver: 9VDC / 20mA max.
• 9V battery holder and adapter jack included
• dimensions:
• transmitter: 55 x 40mm / 2.2 x 1.6”
• receiver: 100 x 50mm / 3.9 x 2.0”
• not recommended for outdoor use
MK148
MK102
MK120
1 LED scans from side to side or in 1 direction (selectable). as attention
grabber in stores, at exibitions, etc.... as seen in classic TV series....
applications: . toys. scale and RC models. as gadget. for stage, plays,
movies, etc.... 6 high-intensity 3mm red leds
power supply: 4-15VDC (20mA at 12VDC)
• fixed scan speed (side to side): 0.5s
• dimensions: 55x25x10mm / 2.18 x 0.99 x 0.39”
MK107
8 LEDs.
• Different LED running effects are selectable (PROG
push button).
• Adjustable effect speed (SPEED potentiometer).
• Push button for power stand-by (OFF push button).
• power supply: 9V battery (not incl.)
• dimensions: 95 x 40mm / 3.5 x 1.6”
Great effect tool - tool - tool - tool!!
Can be used for various audio systems, karaoke, P.A.,
toys, or just for fun...
• 4 Adjustments for MIC or input level, volume or
output level, echo delay time, and feedback.. 40 Kb
SRAM for low distortion and good sound quality.
onboard microphone and audio amplifier. line-In &
Line-out connection. 9V battery snap included
• power supply: 9V battery (6LR61 not incl.) or 9...12V
DC regulated
• power consumption: 150mA max.
• delay time: 80…200ms
• speaker output: 500mW (8 ohm, 10% THD)
• dimensions: 85 x 70 x 20mm / 3.35 x 2.76 x 0.78”
DIGITAL
ECHO CHAMBER
MK173
NEW
Suited for different
applications (e.g. model
construction) and also
educational.
• Adjustable flashing speed
with two potentiometers.
• consumption: ca. 8mA
• power supply: 9V battery
(not incl.)
• dimensions: 33 x 32 x
15mm / 1.3 x 1.25 x 0.6”
For intermittent operation of circuits and equipment.
• Blinking light, video/photo single frame shooting, slide projector
control, miniature models.
• output relay with dry switch-over contact: 3A/24V
• pulse time adjustable: between 0.5 and 5s
• pause time adjustable: between 2.5 and 60s
• power supply: 12Vdc / 100mA
• dimensions: 40 x 85mm / 1.6 x 3.4”
ONBOARD MICRO-
PHONE AND AUDIO
AMPLIFIER
• two super bright red LEDs.
• very powerful flash effect.
• for emergencies, warning signs,
as eye-catcher, ‘alarm-active’ -
simulation, etc ....
• ‘Auto turn-on at dark’ - mode with
adjustable sensitivity.
• on/off switch
• power supply: 9V battery (not
incl.) (12V possible)
• dimensions: 55 x 32 x 40mm /
2.2 x 1.3 x 1.6”
MOUNTED VERSION
MK182
MK111
Interval timer
MK107
Led running light
MK173
Mini-6-led chaser
MK10 2
Flashing leds
MK148
Dual super bright ashing red lights
MK120
IR light barrier










