Datasheet

313130 31
•
Robot kits
KNS7
use the contents of this set to change the speed of your existing
sets. contains: motor, 2 set gears, metal shafts, gearbox and
other accessories
• powered by: 2 x AA batteries (not included)
A sensor-activated robot car.
• The car changes directions when the
sensor detects noise or when the car hits
an object.
• recommended age: 14+
• uses a microphone as sound sensor
• dimensions: 110 x 90 x 60mm
• power supply: 2 x 1.5V AA batteries (not
included)
transmission: pulley drive operation. supplied with: pre-punched
boards, gearbox, gears, shafts, switch, motor, battery holder and
all necessary parts. instructions are easy to follow. required tools:
knife, screwdriver, long-nose pliers
KSR2
The robot frog moves forward when it detects
sound and repeats the following movements
sequentially : start (move forward) -> stop ->
left turn -> stop -> right turn -> stop.
• Two sets of gear motors (unassembled).
• dimensions: 90 x 125 x 100mm / 3.5 x 4.9
x 3.9”
• power supply:
• mechanical: 2 x 1.5V AA batteries (not
included)
• electronic: 9V-battery (not included)
put up to 4 tanks into battle with each other
using the multichannel IR remote control. each
Titan Tank will recoil and make shooting sound
effects when firing. Titan Tank will automatically
turn around when shot by another Titan Tank.
Once shot 4 times the Titan Tank will continue to
turn around and produce a siren sound. 6-wheel
drive allows each Titan Tank to move and turn
smoothly. no soldering required.
The Escape Robot Kit works just like an
A.I. robot.
• It never fails to find its way out of a maze.
• The Escape Robot uses 3 IR emitting
diodes and 1 IR receiving mounted to
send and receive signals and detect
obstacles.
• The Escape Robot’s built-in
microprocessor enables it to “think” on its
own: it gathers and processes information
on its environment so it can avoid any
obstacle.
• The Escape Robot moves about on 6 legs.
• This kit comes complete with 2 sets of
differently designed legs that move in
their own distinct way.
• Fun and excitement are guaranteed!
• recommended age: 14+
• dimensions: 140 x 150 x 100mm / 5.5 x
5.9 x 3.9”
transmission: gear drive & pulley drive operation. supplied with: pre-
punched boards, gearbox, gears, shafts, switch, motor, battery holder
and all necessary parts. instructions are easy to follow. required tools:
knife, screwdriver, long-nose pliers
transmission: pulley drive operation. supplied with: pre-punched
boards, gearbox, gears, shafts, switch, motor, battery holder
and all necessary parts. instructions are easy to follow. required
tools: knife, screwdriver, long-nose pliers
Scarab is a robot that uses 2 touch sensors to detect obstacles.
• When its antennas (touch sensor) detect an obstacle, Scarab will first step back and then
automatically execute a two-step manoeuvre to avoid the obstacle.
• The manoeuvre is a combination of “left turn”, “right turn”, “reverse” or “stop”.
• The Scarab Robot can be configured with different sets of movements.
• The Kit comes complete with 2 sets of differently designed legs, which move in their own
distinct way.
• Let the fun begin!
• recommended age: 14+
• dimensions: 175 x 145 x 85mm / 6.9 x 5.7 x 3.3”
The Ladybug Robot walks on 6 legs and uses infrared
emitting diodes for “eyes” in order to avoid obstacles.
• Ladybug walks straight ahead but automatically makes a
left turn the moment an obstacle is detected.
• The Kit comes complete with 2 sets of differently
designed legs, which move in their own distinct way.
• Let the fun begin!
• dimensions: 120 x 150 x 85mm (length feelers : 40mm) /
4.7 x 5.9 x 3.3” (feelers length: 1.6”)
KSR8KSR4KSR1
KSR5KSR6
KNS6
KNS4
KNS5
KNS4
Coptermech
KNS5
Automech
KNS6
Trainmech
KSR1
Robot car
KSR4
“escape” robot kit
KSR8
Titan tank
KSR2
Robot frog
KSR6
“ladybug” robot kit
KSR5
“scarab” robot kit
KNS7
Gearbox 2 in 1