Datasheet

2020
Home
This code lock may be used to switch an alarm (e.g.car alarm K3504) on and off, or to
open a door lock. An LED on the operating panel indicates the position of the ‘lock’.
• The code is easy to define.
• Because the operation panel is completely enclosed, it may be used inside and
outside the house.
• more than 3000 codes (4 digits)
• relay output: 5A / 220V
• time limit for code entry: ± 5 seconds
• power supply: 9 - 15VDC or 8 - 12VAC
• power consumption:
•output on: 40mA
•output off: 0.3µA
• dimensions:
• front panel: 80 x 80mm / 3.2 x 3.2”
• depth: 40mm / 1.6”
K8027
This switching mounted can be plugged into
our K8006 base unit.
• Can be used to switch lamps or other
domestic loads.
• To be controlled via push buttons,
switches or one of our control mounteds
or kits such as the K8046, K8055,
K8061, K8000 PC interface, etc...
• (50/60Hz)
• max. load: 2.5A (275W/110V -
575W/230V)
• dimensions: 65 x 57 x 25mm / 2.6 x
2.2 x 1”
Innovating and impressive code lock. Impossible to determine the pressed
keys due to the use of digital rotary encoder. codelock with rotary encoder and
7-segment display. 4-digit code. several operating modes. adjustable pulse
duration. application examples: . open a door, gate, fence…. arm / disarm your
alarm system. prevent unauthorized use (mode 3) of car, entertainment systems,
computers, machinery…
relay output NO/NC: 3A / 24VDC max.
• power supply: 12VDC / 100mA max.
• Dimensions:
• front: 85 x 85mm / 3,35 x 3,35”
• mounting depht: 45mm / 1,77”
Create your own domestic modular light control system.
• For use with optional plug-in mounted K8007 /K8037, plug-in timer mounted K8008 or plug-
in slow-on/slow-off mounted K8029.
• Bus system holds up to five plug-in units.
• Optically insulated push button inputs.
• Can be controlled with open collector circuits (ex.K8000 /K8055/ K8061 computer interface
card, with IR remote control receiver K8050 or with K8023).
• Local control pushbuttons included.
• LED power and mains indicator.
• LED operation indicator for each channel.
• Low-voltage (24VAC) control circuit for extra safety.
• Each plug-in slot is fused.
• Includes 10 LEDs for pushbutton illumination.
• A custom enclosure for rail mounting is available (B8006).
• 5 separated channels
• maximum output: 2.5A per channel (fuse protected)
• push button control current: 150mA
• open collector control current: 35mA DC
• power supply: 24VAC / 300mA
• supply voltage for mounteds: 110V to 240VAC
dimmer to be used in our K8006 home light system. suitable
for incandescent lamps, mains voltage halogen lighting and low
voltage halogen lighting in combination with a conventional (wire
wound) transformer. easy pushbutton operation. a brief push
toggles on/off, while continued pushing engages dimming action.
non volatile memory for last set light intensity. lots of safety features
to make lamps last longer, such as “soft-start” and automatic
deactivation after 12 hours or after 20 min at insufficient intensity
.... transformer protection in case of defective light sources. LED
status indication. replaces K8007
suppression of radio & TV interference according to EN55015
• operating voltages: 110-125V or 220-240V AC (50/60Hz)
• max. load: 350W/230V or 170W/115V
• max. phase shift with inductive load: 30°
• dimming speed: ± 5 sec.
• PCB dimensions: 65 x 57 x 25mm / 2.6 x 2.3 x 1”
K8006
5
KANALEN
K8037
For use with K8006 bus system.
Microprocessor controlled.
• Dualmodeoperation:•Slowon/Slowoffdimmer
with two independent and programmable delays.
• Dimming direction changes with each key press.
• Manual level control is possible.
• This mode also simulates a ‘regular’ dimmer.
• * Light is turned on at full power for a programmable
time, after which it slowly fades to zero, also during a
programmable time.
• for use with the Velleman home modular light system K8006
• 2 programmable delays ranging from 1s to 1h
• no memory loss in case of power failure
• ‘soft-start’ function that prolong the life of the bulbs
• AC power: 110-125 or 220-240VAC 50/60Hz
• max. load: 1.3A (150W / 120V - 300W / 230V)
• dimensions: 67 x 57 x 25mm / 2.7 x 2.3 x 1.4”
• not suited for use with low voltage halogen lighting or electronic
transformers
14 different functions including timers,
switching, flashing, interval, random
switching...
• Two pre-programmed delays.
• Learning mode for delays of 2 sec. up
to 12 days.
• Pushbutton control (with home modular light
system K8006).
• EEPROM for delay time storage in case of power failure.
• On-board transient filter for relay contacts or load (selectable).
• Suitable for control of incandescent lighting, halogen lighting,
fluorescent lighting, fans, valves, buzzers...
• also available as stand-alone version: K8015
• operational voltages: 110-125 or 220-240Vac 50/60Hz
• max. load: 2.5A (550W / 220V ; 275W / 110V)
• dimensions: 65 x 57 x 25mm / 2.6 x 2.2 x 1”
K8008
K8029
K8068
K8082
K6400
K6400
Code lock
K8029
Slow on-off dimmer
K8006
Domotica light system bus-pcb
K8037
Bus dimmer for home modular light system
K8082
“safe”-style code lock
K8027
Relay output mounted for k8006
K8068
Dimmer for electronic
transformers
K8008
Multifunction relay
mounted