Datasheet

151514 15
VM106: p35
Audio/Video
K4700
This stereo speaker protection prevents
switch-on clicks and DC components on
the output of the amplifier connected.
switch-delay: ± 6 seconds
• DC protection: +1V/-1V
• max. input voltage: 200Vpp + DC
• max. switching current: 10A
• LED indication for: WAIT (switch-on
delay) and ERROR (DC on speaker
output)
• supply voltage: 220VAC
• PCB dimensions: 55 x 125mm / 2.2
x 4.9”
K7000
This signal tracer /injector has been designed to inject or detect a specific signal into an audio
circuit in need of repair (such as amplifiers, radios, tone controls...
• ) so as to detect the fault.
• In this way problems can be traced more easily.
• The signal tracer may also be used as a simple monitor or amplifier.
• signal injector:
• 0-2.5Vrms output (adjustable)
• output impedance: 1.5Kohm
• frequency: ± 1kHz
• signal tracer:
• 3.5mV to 10Vrms sensitivity (adjustable)
• gain: 40dB
• input impedance: 50Kohm
• output power: 0.5W / 8ohm
• power supply: 7-9VAC or 9-12VDC / 150mA
• dimensions: 60 x 53mm / 2.4 x 2.1”
K8077
Kit contains all necessary parts to build your compact but powerful high quality
subwoofer *
* Wooden panels not included!
bass-reflex system with adjustable tube. compact size due to dual-speaker principle.
adjustable level and filter response. auto power-on/off system. phase switch (0°-180°).
line level and speaker level inputs for maximum compatibility. ‘Full-range’-option for
use in active speaker system. separate chamber for electronics avoids air leaks
power output: 100Wrms/ 4ohm (10% THD)
• filter freq. response:
• wide: 25 - 110Hz (-6dB)
• narrow: 18 - 65Hz (-6dB)
• speakers: two 6.5” 8 ohm drivers
• line level input sensitivity: 500mV
• auto turn-on level: 5mV
• volume*: approx. 20 liter
• power supply: 120/230VAC
• dimensions: 460x310x210mm / 18.2 x 12.3 x 8.3”
digitally cleans the video signal / removes unwanted distortion in video signal. stabilises
picture quality and luminance fluctuations. improves picture quality on LCD monitors or
projectors. S-video and composite video in- and output (it is impossible to use S-video
and composite video signals simultaneously). LED indication when distorted video
signal detected. for PAL / NTSC video. warning: . only use the K8036 to back up original
video material of which you are the rightful owner (DVD, VHS, VCD, ...). check copyright
information of the original material
power supply: 9Vdc / 100mA min. (adapter required)
• dimensions: 100 x 84mm (4.0” x 3.3”)
mounted version
K8036
K8077
Subwoofer kit
K4700
2-channel loudspeaker protection
K7000
Signal tracer/injector
K8036
Video signal cleaner