User's Manual

USB USB

PAIR

Remote and RF Adapter PairingRemote and RF Adapter Pairing

Insert RF Adapter into an open USB port

Press the PAIR button on the RF adapter

Press and hold SETUP and NAVIGATE UP

buttons simultaneously for 3 seconds

Press and hold SETUP and NAVIGATE UP

buttons simultaneously for 3 seconds

The POWER key on the remote will blink

rapidly while the remote is in RF pairing mode

The POWER key on the remote will blink

rapidly while the remote is in RF pairing mode

If pairing is successful, the POWER

key on the remote will blink twice

If pairing is successful, the POWER

key on the remote will blink twice

If pairing is not successful, repeat steps 2-5.

Si el televisor no se apaga, repita este proceso

utilizando el siguiente código para su marca

de TV.

IN ORDER FOR THE REMOTE CONTROL AND RF ADAPTER TO COMMUNICATE, THEY MUST BE PAIRED.

OLLOW THE INSTRUCTIONS BELOW TO PAIR THE KEYBOARD REMOTE CONTROL WITH THE RF ADAPTER.

N ORDER FOR THE REMOTE CONTROL AND RF ADAPTER TO COMMUNICATE, THEY MUST BE PAIRED.

OLLOW THE INSTRUCTIONS BELOW TO PAIR THE KEYBOARD REMOTE CONTROL WITH THE RF ADAPTER.

PAGE 1
Remote and RF Adapter Pairing IN ORDER FOR THE REMOTE CONTROL AND RF ADAPTER TO COMMUNICATE, THEY MUST BE PAIRED. FOLLOW THE INSTRUCTIONS BELOW TO PAIR THE KEYBOARD REMOTE CONTROL WITH THE RF ADAPTER. IN ORDER FOR THE REMOTE CONTROL AND RF ADAPTER TO COMMUNICATE, THEY MUST BE PAIRED. FOLLOW THE INSTRUCTIONS BELOW TO PAIR THE KEYBOARD REMOTE CONTROL WITH THE RF ADAPTER.
PAGE 2
Clear Pairing Information YOU MAY HAVE TO CLEAR PAIRING INFORMATION IF YOU WISH CREATE A NEW REMOTE/RF ADAPTER PAIRING. HERE IS HOW TO CLEAR PAIRING INFORMATION ON THE RF ADAPTER AND REMOTE. YOU MAY HAVE TO CLEAR PAIRING INFORMATION IF YOU WISH CREATE A NEW REMOTE/RF ADAPTER PAIRING. HERE IS HOW TO CLEAR PAIRING INFORMATION ON THE RF ADAPTER AND REMOTE. 1 With the RF Adapter plugged into a USB port and powered on, press and hold the PAIR button for 5 seconds until the LED blinks 4 times.