User's Manual Part 1

www.urcsupport.com
7
Device Table
NOTE: Please refer to the table below when
performing the instructions in
“Programming Device Control” on page 9 or
“Setting Up a Combo Unit” on page 11.
Press MUTE once to turn the sound off
or on.
Press CANCEL to
Press LAST once to recall the last
channel.
Use to command your PVR/DVR
to instantly skip forward 7 seconds in
the program you are watching.
Use to command your PVR/DVR
cable box to instantly replay the last 7
seconds of a program you are watching.
Press LIVE TV to command your PVR/
DVR cable box to return to watching live
TV.
In all modes except SAT, use REW, PLAY,
FFWD, STOP, and PAUSE to control a
VCR, DVD player, or a PVR (after
selecting a desired device). To record in
the VCR mode, press REC twice.
In the SAT mode, use these keys to
control the DVR/PVR functions of the
set-top box.
Use the keypad numbers (1-9, and 0) to
directly tune channels (e.g., 09).
For amplifiers/receivers, use the keypad
numbers to select inputs 1 through 10.
Use TV/VID to select an input source.
Use ADD, REMOVE, DELETE, or SCENE to
control your Z-wave compatible devices.
Key Function
Helix 5 Device.fm Page 7 Tuesday, June 5, 2007 5:24 PM