User's Manual Part 1

www.urcsupport.com
10
NOTE: If the selected mode key emits a long blink,
the entry is invalid. Repeat steps 2 through 3
and try entering the same code again.
NOTE: If the device does not have a PWR key, press
the(Play) key.
5. Repeat steps 1 through 4 for each device you
want the remote control to operate. For future
reference, write down each working device
code in the boxes on the following page.
VCR Code
Device Type:___________________
DVD Code
Device Type:___________________
AMP Code
Device Type:___________________
SAT Code
Device Type:___________________
TV Code
Device Type:___________________
4. Aim the remote control at the device and
press PWR once. The device should turn off. If
it does not, repeat steps 2 through 3, trying
each code for your brand until you find one
that works. If it still does not respond, try
searching for the code (see “Searching for
Your Code” on page 12).
Helix 5 Device.fm Page 10 Tuesday, June 5, 2007 5:24 PM