User's Manual

Viewsonic Tweety RF Remote
Rev 2.9A November 05, 2001
Universal Electronics Inc. Confidential Page 30 of 63
 If another <Digit> key is
pressed/released while the <Re-Sync>
key is still held down
 The system will setup another RF-channel, corresponding to that digit key, for the Transmitter, it then
sends out another “Re-Sync” Make code data packet in that RF channel setting.
 This process will be repeating as above in response to different <Digit> key is pressed/released while
<Re-Sync> key is still held down.
This Re-Sync signature data transmission process will be repeated as described above each time another <Digit> key is pressed/released until
both Transmitter and Receiver units match its selected RF-channel. This channel frequency will then be used to transmit the data packet.