User's Manual

17
17
9. If Volume Lock was successful, the following message
will display. If not, you will be given the options to
“Try Again” or “Cancel.”
Set Receiver Mode
To program your remote to control 2 receivers located in the
same room:
1. Turn on your TV and DIRECTV Receiver.
2. Slide the MODE switch to the DIRECTV position.
3. Press MENU on your remote control, then select
“Parental, Fav's & Setup,” “ System Setup,” a n d
“Remote Control.”
4. Select “Program Remote.”
5. Select “Advanced.”
6. Select “Set Receiver Mode.”
7. Follow the on-screen instructions to complete the
process.
Multi-Box Setup
To program your remote to control 3 or more DIRECTV
Receivers in one room:
1. Turn on your TV and DIRECTV Receiver.
2. Slide the MODE switch to the DIRECTV position.
3. Press MENU on your remote control, then select
“Parental, Fav's & Setup,” “ System Setup,” a n d
“Remote Control.”
4. Select “Program Remote.”
5. Select “Advanced.”
6. Select “Multi-Box Setup.”
7. Follow the on-screen instructions to complete the
process.
DIRECTV RC65RBX.fm Page 17 Wednesday, May 5, 2010 6:25 PM