User's Manual

5. Repeat step 4 four more times for the remaining digits.

Press number 2 for the second digit, 3 for the third digit,

4 for the fourth digit and 5 for the final digit.

CHANGING VOLUME LOCK

Depending on how you set up your remote, the

VOL

and

MUTE

may control the volume only on your TV or other compo-

nents, regardless of which position the switch is under. This

remote can be programmed so that the

VOL

and

MUTE

keys

work ONLY with the component selected above the slide

switch. To select this feature, perform the following step.

1. Press and hold the

MUTE

and

SELECT

keys until the green

light under the

DIRECTV

icon flashes twice and release

both keys.

2. Using the number keys, enter in

9-9-3

(the green light

will flash twice after the 3).

3. Press and release the

VOL

S key (the green light will

flash 4 times).

Now the

VOL

and

MUTE

keys will work ONLY for the compo-

nent selected by the slide switch position.

DirecTV-M2081.qxd 10/28/2004 2:15 PM Page 24