User Manual

6.3.4.6 Restore Device
There might be cases where, for a variety of reasons (such as manual linking), a device does not
perform as represented in ISY. In these cases, choose this option to restore all the links and
reprogram the device to what’s logically represented in ISY.
6.3.4.7 Copy Attributes
This menu option allows you to copy attributes from one device and paste them into another.
Attributes are such things as On Level, Ramp Rate, Set Point, etc.
6.3.4.8 Paste Attributes
This menu option allows you to paste the attributes which were copied into the selected device.
6.3.4.9 Properties
The purpose of this dialog box is to add additional information for each node (device) such as the
location and the description.
The isLoad check box can be used to show whether or not this device is actually controlling or
physically connected to a load.
The information gathered here is included in the HTML file created in Generate Topology Menu
Figure 38. Properties Dialog Box.
6.4 Scene
Scenes are groups with members comprising of INSTEON devices. Each of which may have a
certain pertinent and permissible attributes for that specific Scene. For instance, a SwitchLinc
may become a Controller for a scene and all the other devices assigned to the scene would
respond to it based to On Level and Ramp rate attributes (if applicable) for that scene.
Attributes for all devices are stored in the devices itself. These attributes are invoked in three
levels of your lighting network, the ISY, Controller and Local.