User Manual

6.3.4.1 Query
Choosing this option causes ISY to query the selected device. The ISY will retrieve the status of
the device and present the status on the view pane. This operation usually takes between 5 to 10
seconds depending on the device.
6.3.4.2 Rename
Choose this option to rename the selected device.
6.3.4.3 Remove
Choosing this menu option completely removes the highlighted device from ISY, deletes all the
associated timer, triggers, and dissociates it from all the scenes it may have belong to.
In case of “Remove from Scene”, choosing the menu option removes the selected device from
the Scene within the context of which it was selected.
6.3.4.4 Replace
This menu option allows you to replace a defective device assigned to a device name with a new
device. The ISY takes care of removing the defective device address from the device name and
adding the new device address into the existing device name. It will swap all the linking
information from the defective devices to the new device.
Figure 37. Compatible device replacement list.
To replace a defective device, you must first add the replacement device
Then right mouse click the device node/name with the defective device. Select Replace menu
and choose the replacement device from the menus of compatible or available devices.
6.3.4.5 Add to Scene
When there are many devices, using the drag and drop method sometimes becomes challenging.
Choose this menu option to drop a device into a scene manually.