User Manual

Figure 34 – Device Properties
Buttons available are ON, Fast ON, OFF, Fast OFF, Brighten and Dim.
ON or OFF Buttons, turns on/off the lights using the preset ON/OFF levels and ramp rate. This
action is similar to pressing the switch once.
Fast ON/OFF Buttons, turns on/off the lights to full ON/OFF at the fastest ramp rate. This action
is the similar to quickly tapping the switch twice.
Brighten and Dim Buttons, adjusts the light level by 5% for every click of the button. If you press
and hold the button the level will change at 5% step for every second it is held.
Mutually Exclusive Button allows you to group the buttons in Exclusive OR state. This button
select is only available with the KeypadLinc Devices. The idea is you group a set of buttons so
that only one button will be in ON state at any time. For example, you group buttons A and B,
where A is assigned as All ON and B as All OFF. The state of the status LED in each button will
be as follows:
Action Reaction
When All ON (button A) is pressed the status LED is Lit. Button B LED is not Lit
When ALL OFF (button B) is pressed the status LED is Lit Button A LED is not Lit
Refer to the KeypadLinc User’s Manual Grouping Button section for more information.