User Manual

ISY Node - shows all the devices physically (though could be wireless)
attached/linked to ISY.
Scene Node
- identifies a Scene which is a grouping of INSTEON devices with
certain attributes (such as on level and ramp rate).
INSTEON Device Node
- identifies an INSTEON device. Note: the icon changes
based on the type of INSTEON device.
Clicking on the icons on the tree view brings up the associated view in the view pane.
Right clicking on the icons on the tree view brings up a menu of actions appropriate only for that
node on the tree.
6.1.2 View Pane
The View Pane is located in the right sections of the GUI. The view pane changes based on the
tree node selected.
Selecting Network, ISY, and Scene nodes presents an overview and tabulation of all the
INSTEON devices with pertinent and important information relating to each device (such as its
current state). It is specifically designed to give you an immediate access to most needed
information during setup, while simple navigation features enable the user to jump to a device
(such as a switch) to perform necessary actions.
6.1.3 Operation Pane
The Operation Pane is located at the bottom section of the GUI. Depending on the option or node
selected on the Tree View it will contain the actions you can perform.
If you selected an INSTEON device or a Scene in the View Pane or the Tree View; the Bottom
Pane will show the actions you can perform on the device or the Scene respectively.
6.2 Network Node
The network node shows a table of all devices and its status in the network. If you only have one
ISY unit, the table presented in this level is the same as the table in the ISY node.