OpenADR Quick Setup Guide.Rev 2

h. Configure OpenADR Reports (2.0b)
Register All – This option must always be checked since OpenADR 2.0b requires all reports
(status/usage) to be registered at the same time.
Register – if Register All is checked, all report types (status/usage) are registered at the same time.
Otherwise, only that specific report (usage OR status) is registered.
Report registrations are cannot be canceled. So, if there are any changes to any reports, Register button
must be clicked again to re-register all reports (replaces the old metadata information).
ISY will automatically decide what needs to be registered based on the device classes of devices that are
in Auto DR group. For instance, energy monitoring channels or Smart Meters, only register Telemetry
Usage whereas thermostats and load controllers register Telemetry Status. Some devices may report
both.