User's Guide

39
6. Historical results
Connecting to the meter from another device
1. If connecting by Wireless: on the external device, open a
browser and navigate to your Xprecia Prime™ meter’s IP
address (see “Setting up” above)
2. If connecting by USB: use the IP address 172.16.71.1
.
Exporting the results
1. If your Supervisor has enabled operator login, the operator login
screen will appear. Enter your Operator ID & password and then
click the Login button.
NOTE: Your browser may give you a security warning about
the website not being secure (because the meter uses the http
rather than the https protocol). This is not of concern because
the connection between the meter and your device is
happening within your wireless network or over USB.