User's Guide

26
4. Remove a test strip from its vial
Firmly close the vial immediately.
Ensure that your hands are clean and dry to avoid
contaminating or damaging the test strips.
Once you have removed the test strip from a vial,
you should conduct the test within 10 minutes.
5. Scan strip barcode
Tap the scan barcode button to scan
the strip barcode.
The meter will beep when the barcode
is scanned.
Note: When using a test strip from a
new vial, you will be prompted to scan
the vial after inserting the strip.
6. Insert the strip
Following the on-screen
instructions and with the
strip's print-side facing
upward, follow the direction of
the arrows and gently but
firmly insert the test strip into
the test strip port.
To avoid a potentially inaccurate test result, you must use the strip within
10 minutes of removing it from the vial.
Do not use test strips that are past their expiration date (printed on the label
of the vial).