User's Guide

18
5. Scan strip barcode
Tap the scan barcode button to scan
the strip barcode.
The meter will beep when the barcode
is scanned.
Note: When using a test strip from a
new vial, you will be prompted to scan
the vial after inserting the strip.
6. Insert the strip
Following the on-screen
instructions and with the
strip's print-side facing
upward, follow the direction of
the arrows and gently but
firmly insert the test strip into
the test strip port.
7. Meter prepares
Wait for the meter to prepare.
When the meter is ready, the Apply
sample now screen will appear.
DO NOT apply the sample until prompted.
You must always insert the exact strip whose barcode was
scanned in step 5.
10 cm. /
4 inches