User's Guide

12
Configuring access control
Log in options
You can configure your meter to limit access. When access is
limited, users will be forced to log in before reaching the home
screen. You can also define special users (called Supervisors) that
have access to advanced configuration options (see Page 45 for
more details).
Operator list
An operator list is required for log in to be enabled. The operator list
contains a list of the operators that can use the meter. You can
define which operators are Supervisors. For detailed instructions on
setting up an Operator list, see Page 50.
In order to enable log in, you will first need to set up an operator list (see
below).
To log out, simply turn off the meter.