User's Guide

10
Xprecia Prime™ PT test strips
Electrodes: Insert this end into the meter’s strip port. Target Area: Apply sample
here when prompted by meter.
Strip Barcode: Scan this barcode when prompted by the meter (the barcode reader can be found
on the bottom of the meter).
First time use
Turning the meter on and off
To turn the meter on, touch the power button briefly.
You can turn the meter off by touching the power button for
several seconds and answering yes when prompted for
confirmation.
• Use a test strip only once and dispose of it in biohazard waste after use.
•
Always keep unused strips in their original vial with the lid firmly closed.
If the power button or touch screen are not responding, you can force the
meter to shut down by disconnecting the external power supply and holding
your finger on the power button for around 15 seconds until the screen goes
black.