User's Guide

8
2. Getting started
Powering the meter
The Xprecia Prime™ meter is charged via a micro USB cable and AC
power supply (included). It can also be charged using a micro USB
cable connected to another suitable power source (such as a USB
port on a computer).
It is best to make sure that the meter is fully charged before first use.
AC power supply
and cable
To charge meter, plug in
AC power supply and connect the USB cable
Your AC power supply comes with a range of plugs. Find the right plug for your region
then follow the instructions below to prepare your power supply for use.
Step 1: remove the plastic insert (if present)
Slide down the tab, then lift the insert to
remove.
Step 2: fit the insert for your region
First, place the insert as shown below (left), then press down as shown below
(middle). Test that the insert is fitted correctly by gripping the insert and pulling up as
shown below (right).