User's Guide

8
Connecting to a wireless network
If it has been more than three months since you ran a test and you
are using a new vial of test strips, a wireless (WiFi) network
connection with Internet access may be required for the analyzer to
download the necessary calibration information for the strips.
If not already connected, follow these steps to connect to a wireless
network:
1. From the Home screen, touch the SETTINGS button, then touch
Connectivity to navigate to the Connectivity screen
2. Touch Wi-Fi Settings to get to the WiFi Settings screen
3. Turn on Wi-Fi
4. Select a network from the CHOOSE A NETWORK panel and enter the
WiFi password (if prompted)
5. After the connection is established, press to confirm your selection
Downloading strip calibration data from the internet
The analyzer will download strip calibration data automatically when
a stable Internet connection is established.
If you plan to use the analyzer away from a reliable Internet
connection for extended periods, you should make a point of
connecting to a wireless network at least every three months or so.