User's Guide

2. Getting started

Setting the date and time (by setting the time zone)

Before you run any tests you should check the date and time

(displayed at the top of the screen). The Analyzer uses the internet

and your time zone to set the date and time.

If the date and time are not correct, you will need to set the time

zone. Set the time zone as follows:

1. From the Home screen, touch the SETTINGS button to navigate to the

Settings screen, then select Analyzer and then Time zone

2. Select your region, touch , then select your sub-region. You may

need to swipe your finger up and down on the screen to scroll to your

selection

3. Touch to confirm your selection