User's Guide

6
First time use
Turning the analyzer on and off
To turn the analyzer on, touch the power button briefly.
You can turn the analyzer off by touching the power button for
several seconds and answering yes when prompted for
confirmation.
Registration
The very first time you power up your device, you will be guided
through a registration workflow in which you will need to connect to
a wireless network (that is connected to the internet), enter your
e-mail address and type in a code that has been e-mailed to you.
You must complete these steps to unlock your device.
If the power button or touch screen are not responding, you can force the
analyzer to shut down by disconnecting the external power supply and
holding your finger on the power button for around 15 seconds until the
screen goes black.