User's Guide

3. Running a test
15
10. Analysis in progress
During analysis, a circle will show test
progress. When the analysis is complete, a
Result screen will appear.
11. Result screen
When the test is complete, the result
will be displayed. Units of mg/L and
PPM can be shown. To switch units,
touch unit specifier beside the result.
To add a text comment to the result
record, touch and enter the
comment using the on-screen
keyboard.
To exit, touch .
12. Eject strip
Hold the analyzer over a waste bin so that the
strip points toward the opening of the waste
bin, then press the eject button to discard the
test strip.
Unexpected results
If an unexpected result is reported, the test should be repeated with a fresh
sample. If the result is similar, you may choose to confirm the result by
other means. Inconsistent results could indicate poor test strip storage, a
contaminated sample or analyzer malfunction.
Be careful not to bump the analyzer or
strip while the sample is being analyzed.