User's Manual

UL-801 Installation Manual
Page 202
23-20-06 15 December 2011
B. UniLink Installation Kit
(1) Installation Kit P/N K12030-1
Quantity Part Number Description
1
13636-93601-2
or
93601-2
Rack, ARINC 600, 1 MCU (Barry Controls)
6
MS24693C4
Screw, Recessed, Cres, 100° CSK, 4-40 x 3/8”
1
1219 Rack Connector
2
MS51957-20 Screw, 4-40 x 7/8”, Cres (for configuration module)
2
MS21083C04 Nut, 4-40, Cres, Self Lock (for configuration module)
NOTE: Equivalent substitutes may be used for the listed items in the installation kits.
C. Power Specifications
The UniLink will continue to operate with a 19.0V power input.
Component
Current/Power
(Amps @ VDC)/Watts
Inrush Current
(Amps @ VDC)
Model Part No.
22.0V
Min
27.5V
Nominal
32.0V
Max
22.0V
Min
27.5V
Nominal
32.0V
Max
STBY TX STBY TX STBY TX
UL-801 10801-XX
1A;
22.0W
3.5A typical
@ 77W
0.9A;
24.8W
3.5A typical
@ 96W
0.7A;
22.4W
3.5A
typical @
112W
2.5A @
<100ms
2.5A @
<100ms
2.5A @
<100ms
7A
maximum
@ 154W
7A
maximum
@ 192W
7A
maximum
@ 224W
NOTE:
• The UL-801 is designed to operate using a 5A circuit breaker.
• The UL-801 VDR Transmit Message Duty Cycle is < 750ms.
D. Equipment Weights
Component Weight
UL-801 UniLink Approximately 4.5 Lbs.
Equipment Rack 11.5 Oz.
Connector 5.6 Oz.
Configuration Module 0.5 Oz.
E. VHF Antenna Specifications
Antenna Specifications
Coax Cable Attenuation < 3 dB
Impedance 50 Ohms
Frequency Range 118.000 – 136.975
Power Rating 15W - 35W