User's Manual

UL-801 Installation Manual
Page 25
23-20-06 15 December 2011
Up to four low-resolution display devices can be connected to a single low-resolution bus
and one high-resolution device each can be connected to two high-resolution graphic ports.
TEL Media Status Reason
COMM/MDM TIMEOUT
UniLink has dialed the phone but a timeout occurred prior to a connection
being established.
NOTE: Sequential, excessive timeouts will result in the NOCOMM/AUTO
DELAY message displaying.
COMM/DIALING
UniLink has provided the phone with the dial string command and is waiting
for the phone to answer.
COMM/CONNECTING
The ground has answered the phone and UniLink is communicating with the
DSP.
COMM/IDLE
The phone is hung up and no attempt is currently being made to use it and
SatCom (TEL) is not suspended or waiting to retry.
COMM/CONNECTED
The phone line is connected and messages can or are currently being
transferred.
COMM/PLEASE WAIT
TEL SUSPEND has been manually activated. UniLink is in the process of
shutting down the connection.
NOCOMM/SUSPENDED
SatCom (TEL) has been suspended, either by the crew or automatically due
to excessive failed attempts.
NOCOMM/AUTO DELAY
UniLink is waiting for the configurable AUTO-DELAY timer to expire before
trying again
NOCOMM/CONFIG FAIL
While CONNECTING with the ground server, a message is received saying
the configuration sent by UniLink is invalid. The SatCom (TEL) system is
permanently shut down. Cycling UniLink power is required to exit this state.
NOCOMM/INIT FAIL
The SatCom (TEL) system is not available for operation. One or both of the
following configuration items are invalid: Aircraft Registration Number, or
Phone Access Number.
NOCOMM/DIALING
UniLink exited out of the 5-minute delay and is in the process of making
another connection attempt.
NOCOMM/PLEASE WAIT
TEL SUSPEND has been manually activated while a connection is in
progress. UniLink is in the process of shutting down the connection.
NOCOMM/MDM TIMEOUT
UniLink exited out of the 5-minute delay and while in the process of making
another connection attempt the UniLink modem has timed out.