User's Manual

UL-801 Installation Manual
Page 517
23-20-06 15 December 2011
Configuration Error Messages
Text Action
CDU 2 IS CONFIGURED FOR GRAPHICS BUT
FMS 2 OR MCDU 2 IS NOT CONFIGURED.
Configure UniLink either with ARINC transmit and
receive ports for FMS 2 or MCDU 2, as appropriate, or
with NONE in the CDU 2 GRAPHICS DISP ON field
on the GRAPHICS setup page.
CDU 3 IS CONFIGURED FOR GRAPHICS BUT
FMS 3 OR MCDU 3 IS NOT CONFIGURED.
Configure UniLink either with ARINC transmit and
receive ports for FMS 3 or MCDU 3, as appropriate, or
with NONE in the CDU 3 GRAPHICS DISP ON field
on the GRAPHICS setup page.
AT LEAST ONE CDU IS CONFIGURED FOR
GRAPHICS BUT WEATHER MAPS ARE
DISABLED AND NO SERIAL LO- OR HI-RES
DISPLAY IS CONFIGURED.
Configure UniLink either with ENABLED in the WX
MAPS field on the TEL CONFIG 1/2 page and with
LO-RES DISPLAY, HI-RES DISPLAY 1, or HI-RES
DISPLAY 2 in the correct PORT n field on the SERIAL
setup pages or with NONE in all CDU n GRAPHICS
DISP ON fields on the GRAPHICS setup page.
A SERIAL LO- or HI-RES DISPLAY IS
CONFIGURED BUT WEATHER MAPS ARE
DISABLED AND NO CDU IS CONFIGURED
FOR GRAPHICS.
Configure UniLink either with ENABLED in the WX
MAPS field on the TEL CONFIG 1/2 page and with the
correct value in the appropriate CDU n GRAPHICS
DISP ON field(s) on the GRAPHICS setup page or
with no PORT n field as LO-RES DISPLAY, HI-RES
DISPLAY 1, or HI-RES DISPLAY 2 on the SERIAL
setup pages.
WEATHER MAPS ARE ENABLED BUT NO
SERIAL LO- OR HI-RES DISPLAY IS
CONFIGURED AND NO CDU IS CONFIGURED
FOR GRAPHICS.
Configure UniLink either with LO-RES DISPLAY, HI-
RES DISPLAY 1, or HI-RES DISPLAY 2 in the correct
PORT n field on the SERIAL setup pages and with the
correct value in the appropriate CDU n GRAPHICS
DISP ON field(s) on the GRAPHICS setup page or
with DISABLED in the WX MAPS field on the TEL
CONFIG 1/2 page.
WEATHER MAPS ARE ENABLED AND A
SERIAL LO- or HI-RES DISPLAY IS
CONFIGURED BUT NO CDU IS CONFIGURED
FOR GRAPHICS.
Configure UniLink either with the correct value in the
appropriate CDU n GRAPHICS DISP ON field(s) on
the GRAPHICS setup page or with DISABLED in the
WX MAPS field on the TEL CONFIG 1/2 page and
with no PORT n field as LO-RES DISPLAY, HI-RES
DISPLAY 1, or HI-RES DISPLAY 2 on the SERIAL
setup pages.
WEATHER MAPS ARE ENABLED AND AT
LEAST ONE CDU IS CONFIGURED FOR
GRAPHICS BUT NO SERIAL LO- OR HI-RES
DISPLAY IS CONFIGURED.
Configure UniLink either with LO-RES DISPLAY, HI-
RES DISPLAY 1, or HI-RES DISPLAY 2 in the correct
PORT n field on the SERIAL setup pages or with
DISABLED in the WX MAPS field on the TEL CONFIG
1/2 page and with NONE in all CDU n GRAPHICS
DISP ON fields on the GRAPHICS setup page.
AT LEAST ONE CDU IS CONFIGURED FOR
GRAPHICS AND A SERIAL LO- or HI-RES
DISPLAY IS CONFIGURED BUT WEATHER
MAPS ARE DISABLED.
Configure UniLink either with ENABLED in the WX
MAPS field on the TEL CONFIG 1/2 page or with
NONE in all CDU n GRAPHICS DISP ON fields on the
GRAPHICS setup page and with no PORT n field as
LO-RES DISPLAY, HI-RES DISPLAY 1, or HI-RES
DISLAY 2 on the SERIAL setup pages.