User's Manual

UL-801 Installation Manual
Page 516
23-20-06 15 December 2011
Configuration Error Messages
Text Action
THE VHF-NOCOMM OUTPUT DISCRETE IS
CONFIGURED BUT NO VHF RADIO IS
CONFIGURED.
Configure UniLink either with the correct radio in the
RADIO TYPE field on the VHF CONFIG 2/2 page or
with no DISC OUT n field as VHF NOCOMM on the
DISC OUT pages.
THE SAT-NOCOMM OUTPUT DISCRETE IS
CONFIGURED BUT NO SDU IS
CONFIGURED.
Configure UniLink either with ARINC transmit and
receive ports for an SDU or with no DISC OUT n field
as SAT NOCOMM on the DISC OUT pages.
THE TEL-NOCOMM OUTPUT DISCRETE IS
CONFIGURED BUT NO TELEPHONE IS
CONFIGURED.
Configure UniLink either with the correct air phone in
the AIR PHONE field on the TEL CONFIG 1/2 page or
with no DISC OUT n field as TEL NOCOMM on the
DISC OUT pages.
ARINC IS CONFIGURED BUT OOOI IS
DISABLED.
Configure UniLink either with ENABLED in the OOOI
TIMES field on the SYS CONFIG 2/4 page or with
OFF in the ARINC field on the DSP SETUP page.
AN ARINC VOICE TUNE BUS TRANSMIT
PORT IS CONFIGURED BUT NO A750 VDR IS
CONFIGURED.
Configure UniLink either with the external A750 VDR
in the RADIO TYPE field on the VHF CONFIG page or
with no ARINC transmit port with device VOICE TUNE
BUS.
AN ARINC TRANSMIT PORT IS CONFIGURED
FOR BOTH VOX TUNE AND SOME OTHER
FUNCTION. THE VOX TUNE PORT CANNOT
BE SHARED.
The VOX TUNE bus cannot be configured
concurrently with another device; configure UniLink
accordingly.
THE SETTINGS FOR VOICE FREQUENCY
TUNING, THE VOICE TUNE BUS, AND THE
VHF MODE-SELECT OUTPUT DISCRETE ARE
INCONSISTENT WITH ONE ANOTHER.
Configure UniLink either with:
The VOICE FREQ CONTROL field on the VHF
CONFIG page set to ENABLE 25 or ENABLE 8.33/25,
AND an ARINC transmit port with device VOICE
TUNE BUS, AND a DISC OUT n field configured as
VDR VOX SEL.
OR
The VOICE FREQ CONTROL field on the VHF
CONFIG page set to DISABLE, AND no ARINC
transmit port with device VOICE TUNE BUS, AND no
DISC OUT n field as VDR VOX SEL.
VHF VOICE FREQUENCY TUNING IS
ENABLED BUT NO A750 VDR IS
CONFIGURED.
Configure UniLink either with the external A750 VDR
in the RADIO TYPE field on the VHF CONFIG page or
with DISABLE in the VOICE FREQ CONTROL field on
the VHF CONFIG page.
WEATHER MAPS ARE ENABLED BUT NO AIR
PHONE IS CONFIGURED.
Configure UniLink either with the correct air phone in
the AIR PHONE field or with DISABLED in the WX
MAPS field on the TEL CONFIG 1/2 page.
CDU 1 IS CONFIGURED FOR GRAPHICS BUT
FMS 1 OR MCDU 1 IS NOT CONFIGURED.
Configure UniLink either with ARINC transmit and
receive ports for FMS 1 or MCDU 1, as appropriate, or
with NONE in the CDU 1 GRAPHICS DISP ON field
on the GRAPHICS setup page.