User's Manual

UL-801 Installation Manual
Page 515
23-20-06 15 December 2011
Configuration Error Messages
Text Action
SATCOM IS CONFIGURED BUT IS NOT IN
EITHER MEDIA PRIORITY LIST.
Configure UniLink either with SAT in the desired
priority NORMAL and/or ALTERNATE fields on the
COMM PRIORITY page or with no ARINC transmit
and receive ports for an SDU.
TELEPHONY IS CONFIGURED BUT IS NOT IN
EITHER MEDIA PRIORITY LIST.
Configure UniLink either with TEL in the desired
priority NORMAL and/or ALTERNATE fields on the
COMM PRIORITY page or with NONE in the AIR
PHONE field on the TEL CONFIG 1/2 page.
THE VHF SIMULATOR INTERFACE IS
CONFIGURED. THIS INTERFACE IS FOR
DEVELOPMENT ONLY.
Remove the VHF GND SIM selection on the SERIAL
setup pages; it is used for test purposes only.
THE SATCOM SIMULATOR INTERFACE IS
CONFIGURED. THIS INTERFACE IS FOR
DEVELOPMENT ONLY.
Remove the SAT GND SIM selection on the SERIAL
setup pages; it is used for test purposes only.
THE TELEPHONY SIMULATOR INTERFACE IS
CONFIGURED. THIS INTERFACE IS FOR
DEVELOPMENT ONLY.
Remove the TEL SIM selection on the SERIAL setup
pages; it is used for test purposes only.
A SERIAL PORT IS ASSIGNED TO IRIDIUM
BUT NO COMPATIBLE TELEPHONY DEVICE
IS CONFIGURED.
Configure UniLink either with IRIDIUM in the AIR
PHONE field on the TEL CONFIG 1/2 page or with no
serial port as IRIDIUM on the SERIAL setup pages.
THE CONFIGURED TELEPHONY DEVICE IS
/IRIDIUM BUT NO COMPATIBLE SERIAL
PORT IS CONFIGURED.
Configure UniLink either with the correct serial port as
IRIDIUM on the SERIAL setup pages or with NONE in
the AIR PHONE field on the TEL CONFIG 1/2 page.
A SERIAL PORT IS ASSIGNED TO AERO M
BUT NO COMPATIBLE TELEPHONY DEVICE
IS CONFIGURED.
Configure UniLink either with T-T Aero-M in the AIR
PHONE field on the TEL CONFIG 1/2 page or with no
serial port as Aero-M on the SERIAL setup pages.
THE CONFIGURED TELEPHONY DEVICE IS
A
ERO M BUT NO COMPATIBLE SERIAL PORT
IS CONFIGURED.
Configure UniLink either with the correct serial port as
Aero-M on the SERIAL setup pages or with NONE in
the AIR PHONE field on the TEL CONFIG 1/2 page.
THE NEW-MESSAGE-ANNUNC-INHIBIT
FUNCTION IS CONFIGURED TO USE RADIO
ALTITUDE BUT NO IOP BUS IS
CONFIGURED.
Configure UniLink either with DHC8 IOPn in the
correct PORT n field on the ARINC RECEIVE pages
or with BARO in the ALT TYPE field on the ALERT
CONFIG page.
THE NEW-MESSAGE-ANNUNC-INHIBIT
FUNCTION IS CONFIGURED TO USE RADIO
ALTITUDE BUT THE CONFIGURED ALTITUDE
THRESHOLD VALUE IS TOO LARGE.
Configure UniLink either with a value equal to or less
than 2500 in the INHIB ALT field or with BARO in the
ALT TYPE field on the ALERT CONFIG page.
THE VHF VOX-ANNUN OUTPUT DISCRETE IS
CONFIGURED BUT NO ARINC 750 VDR IS
CONFIGURED.
Configure UniLink either with the external A750 VDR
in the RADIO TYPE field on the VHF CONFIG 2/2
page or with no DISC OUT n field as VOX ANNUN on
the DISC OUT pages.
THE VDR MODE-SELECT OUTPUT DISCRETE
IS CONFIGURED BUT NO ARINC 750 VDR IS
CONFIGURED.
Configure UniLink either with the external A750 VDR
in the RADIO TYPE field on the VHF CONFIG 2/2
page or with no DISC OUT n field as VDR VOX SEL
on the DISC OUT pages.