User's Manual

UL-801 Installation Manual
Page 508
23-20-06 15 December 2011
General Error Messages
Text Action/Description
MFD-LR2
INOP
Cycle power to UniLink and MFD2. If condition persists
contact UASC. If condition is recent or frequent for a
particular device, examine connection between the
graphics display device and UniLink.
MFD-LR3
INOP
Cycle power to UniLink and MFD3. If condition persists
contact UASC. If condition is recent or frequent for a
particular device, examine connection between the
graphics display device and UniLink.
HR-1
INOP
Cycle power to UniLink and high-resolution display 1
(MFD-640 or EFI-890R). If condition persists contact
UASC. If condition is recent or frequent for a particular
device, examine connection between the graphics
display device and UniLink.
HR-2
INOP
Cycle power to UniLink and high-resolution display 2
(MFD-640 or EFI-890R). If condition persists contact
UASC. If condition is recent or frequent for a particular
device, examine connection between the graphics
display device and UniLink.
MCDU1 INOP
Cycle power to UniLink and MCDU1. If condition
persists contact UASC. If condition is recent or
frequent for a particular device, examine connection
between the graphics display device and UniLink.
MCDU2 INOP
Cycle power to UniLink and MCDU2. If condition
persists contact UASC. If condition is recent or
frequent for a particular device, examine connection
between the graphics display device and UniLink.
MCDU3 INOP
Cycle power to UniLink and MCDU3. If condition
persists contact UASC. If condition is recent or
frequent for a particular device, examine connection
between the graphics display device and UniLink.
HF RADIO INOP Cycle power to UniLink and HF radio.
SDU INOP
Cycle power to UniLink and SDU. If condition persists
contact UASC.
TEL INOP
Cycle power to UniLink and telephone system. If
condition persists contact UASC.
CMC INOP
Cycle power to UniLink and CMC. If condition persists
contact UASC.
A740 PRINTER INOP
Cycle power to UniLink and Printer. If condition
persists contact UASC.
SERIAL PRINTER INOP
No action required. Temporary condition that will
correct with next job UniLink sends to printer.
VHF VDLM2 RADIO INOP
Cycle power to UniLink and radio. If condition persists
contact UASC.
THE SYSTEM IS RUNNING LOW ON NVRAM
AND SHOULD BE RESTARTED.
Cycle power to UniLink.
THE SYSTEM IS CRITICALLY SHORT OF
NVRAM. SYSTEM RESTART IS IMMINENT.
Cycle power to UniLink.