User's Manual

UL-801 Installation Manual
Page 451
23-20-06 15 December 2011
O. Configuration Review
1 Press REVIEW [4R] to
display the REVIEW 1/22
page.
REVIEW 1/22
discrete in:
disc in
, active state
º¡:not used
, ground
º:not used
, ground
¬PRINT SEND®
--:--z
¬UNILINK MENU RETURN®
SYS CONFIG 1/4
¬I/O CONFIG STORE®
¬VHF CONFIG TEL CONFIG®
¬SAT CONFIG POS REPORT®
¬PRIORITY REVIEW®
--:--z
¬UNILINK MENU
NOTE: The REVIEW pages are a visual representation of the contents of the
UniLink Configuration Module. After reviewing all pages for errors, press
NEXT on the keypad to return to the REVIEW Page 1. If the
configuration is correct, press RETURN LSK [5R] to display SYS CONFIG 1/4.
Press STORE [1R] twice to save the configuration. If errors were noted during the
review, it will be necessary to return to the appropriate configuration page
to make the changes.
REVIEW 2/22
º£:not used
, ground
º¢:not used
, ground
º:not used
, ground
º§:not used
, ground
º¶:not used
, ground
º:not used
, ground
ºª:not used
, ground
¡º:not used
, ground
--:--z
¬UNILINK MENU RETURN®
3 Press NEXT to display the each
sequential review page.
2 Press SEND [4R] to transmit a
Configuration Report downlink.
NOTE: When SEND is pressed, the
QUEUED message displays over the
SEND LSK.