User's Manual

UL-801 Installation Manual
Page 449
23-20-06 15 December 2011
M. Telephony (TEL) Configuration
SYS CONFIG 1/4
¬I/O CONFIG STORE®
¬VHF CONFIG TEL CONFIG®
¬SAT CONFIG POS REPORT®
¬PRIORITY REVIEW®
--:--z
¬UNILINK MENU
1 Press TEL CONFIG [2R] to
display the TEL CONFIG 1/2
page.
5 Press NEXT to display the
TEL CONFIG 2/2 page.
Press REDIAL PAUSE [1L] and
enter a pause of 5 to 60
seconds.
Press DIAL ATTEMPTS [2L] and
enter a number of dial attempts
of 1 to 6.
Press AUTO-DELAY [3L] and
enter a delay of 1 to 9 minutes.
2 Press AIR PHONE [1L] to
select the option for
telephony communications.
3 Press ACCESS NUMBER [2L] and
enter up to 19 alphanumeric
characters for the primary
telephone access number.
Press ENTER when completed.
NOTE: Contact your DSP to
obtain the correct access
number.
4 Press WX MAPS [3L] to toggle the ENABLED
or DISABLED option for each. Repeat for
SUSP MSG [4L].
NOTE: If IRIDIUM is chosen as the AIR
PHONE option, WX MAPS, in the window
above, displays a BAUD RATE option that
can be selected at LSK [3R].
TEL CONFIG 1/2
air phone
IRIDIUM STORE®
access number
-------------------
wx maps
DISABLED BAUD RATE
¢ººbps
susp msg
ENABLED
--:--z
6 Press RETURN [5R] to display
the SYS CONFIG 1/4 page.
TEL CONFIG 2/2
redial pause
£ºsec STORE®
dial attempts
§
auto-delay
min
--:--z
¬UNILINK MENU RETURN®