User's Manual

UL-801 Installation Manual
Page 445
23-20-06 15 December 2011
(6) Graphics
I/O CONFIG
¬DISCRETE IN SERIAL®
¬DISCRETE OUT GRAPHICS®
¬ARINC RECEIVE
¬ARINC TRANSMIT
--:--z
¬UNILINK MENU RETURN®
1 Press GRAPHICS [2R] to
display the GRAPHICS page.
GRAPHICS
cdu/mfd baud rate
¡ª.kbps STORE®
cdu¡ graphics disp on
-
cdu graphics disp on
-
cdu£ graphics disp on
-
--:--z
¬UNILINK MENU RETURN®
5 When all CDU graphics displays are configured, press RETURN twice to return to the
SYS CONFIG 1/4 page.
3 Press LSK [2L] to display and select
the graphics configuration for CDU1.
CDU# GRAPHICS
¬CDU<*> HR1®
¬RCDU HR2®
¬MFD-LR
--:--z
¬UNILINK MENU RETURN®
4 Graphics options are CDU, RCDU,
MFD-LR, HR1, and HR2. An <*> appears
to indicate that the item is selected.
Press the LSK again and <*> disappears.
All or none of the options may be
chosen.
Press RETURN to return to the
GRAPHICS page.
2 Press CDU/MFD BAUD RATE [1L]
to toggle between 9600BPS and
19.2KBPS.
6 Repeat steps 3 and 4 for CDU2 and CDU3.