User's Manual

UL-801 Installation Manual
Page 443
23-20-06 15 December 2011
(4) ARINC Transmit
ARINC TX 1/3
STORE®
port ¡ speed devices
low PORT 1®
port  speed
low PORT 2®
port £ speed
low PORT 3®
--:--z
¬UNILINK MENU RETURN®
1 Press ARINC TRANSMIT [4L]
to display the ARINC TX 1/3
page.
4 Press LSK [1L] and <*>
appears to indicate that the
item is selected. Press the
LSK again and <*> disappears.
Repeat for each device.
2 PORT 1 SPEED defaults to LOW.
Press PORT 2 SPEED [3L] and
select the LOW or HIGH
speed option. Repeat
for the rest of the ARINC
TX ports. Ports 4 - 8 are
on ARINC TX pages 2 and 3.
ARINC TX OPT 1/3
port ¡
¬FMS/CDU1<*> 741 SDU®
¬FMS/CDU2 VOX TUNE®
¬FMS/CDU3 VM CMC®
¬740 PRINT 604 CMC®
--:--z
¬UNILINK MENU RETURN®
I/O CONFIG
¬DISCRETE IN SERIAL®
¬DISCRETE OUT GRAPHICS®
¬ARINC RECEIVE
¬ARINC TRANSMIT
--:--z
¬UNILINK MENU RETURN®
NOTE: Multiple port devices
can be configured on
a single port but no
device may be configured
so that it resides
on more than one port.
3 Press PORT 1 [2R] to display the
ARINC TX OPT 1/3 page. A list of
devices available for each of the
ARINC TX ports displays.
5 Press NEXT to display ARINC
TX 2/3 and follow the procedure
in step 4. Press NEXT again to display
ARINC TX 3/3. Once all ARINC TX ports
are configured, press RETURN twice to
return to the I/O CONFIG page.