User's Manual

UL-801 Installation Manual
Page 442
23-20-06 15 December 2011
(3) ARINC Receive
I/O CONFIG
¬DISCRETE IN SERIAL®
¬DISCRETE OUT GRAPHICS®
¬ARINC RECEIVE
¬ARINC TRANSMIT
--:--z
¬UNILINK MENU RETURN®
1 Press ARINC RECEIVE [3L]
to display the ARINC RX
1/3 page.
5 Repeat steps 2 and 3 until all
16 ARINC RX ports are set and
then push RETURN [5R].
3 Enter the number of the desired
option for port 1 and press ENTER.
This automatically returns you to
the ARINC RX 1/3 page. Select
another port to configure. The
ARINC RX OPT 1/4 page displays.
2 Press LSK [2L] to configure
PORT 1. The ARINC RX OPT page
displays with a list of the
available options for Port 1.
NOTE: Choosing Ports 2 - 16
displays one of ARINC RX
OPT 1/4 pages.
ARINC RX 1/3
STORE®
port ¡ port ¢
fms/cdu¡ not used
port  port 
¶¢¡ sdu not used
port £ port §
not used not used
--:--z
¬UNILINK MENU RETURN®
ARINC RX OPT 1/4
select
¡ not used #-
 fms/cdu
£ fms/cdu£
¢ ¶¢º print
 ¶¢¡ sdu
§ vm cmc
¶ §º¢ cmc
--:--z
RETURN®
ARINC RX OPT
select
¡ fms/cdu¡ #-
 fms/cdu
£ fms/cdu£
¢ mcdu¡
 mcdu
§ mcdu£
ARINC RX OPT 3/4
select
¡ ¶º fms£ #-
 ¶¢£a gnss
£ ¶º vdr
¢ test
 adc¡
§ adc
¶ generic¡
--:--z
RETURN®
ARINC RX OPT 2/4
select
¡ dhc iop¡ #-
 dhc iop
£ mcdu¡
¢ mcdu
 mcdu£
§ ¶º fms¡
¶ ¶º fms
--:--z
RETURN®
4 After configuring all the ports
on the chosen ARINC RX OPT page,
press NEXT to go to the next ARINC
RX OPT page.
ARINC RX OPT 4/4
select
¡ generic #-
 generic£
£ generic¢
--:--z
RETURN®