User's Manual

UL-801 Installation Manual
Page 440
23-20-06 15 December 2011
(1) Discrete In
DISC IN 1/4
STORE®
disc in ¡ active state
not used ground
disc in  active state
not used ground
disc in £ active state
not used ground
º§z
¬UNILINK MENU RETURN®
1 Press DISCRETE IN [1L] to
display the DISC IN 1/4
page.
5 Press NEXT to display the next DISC IN
page and repeat steps 2, 3 and 4
until all 10 discrete inputs are set.
Press RETURN [5R].
2 Press LSK [2L] to configure
DISC IN 1. The DISC IN OPT 1/2
page displays with a list
of all available options.
DISC IN OPT 1/2
select
¡ not used #-
 brake set
£ strut comp
¢ test
 door ¡ closed
§ door  closed
¶ door £ closed
º§z
¬UNILINK MENU RETURN®
3 Enter the number of the
desired option and press
ENTER. The DISC IN 1/4
page displays.
4 Press LSK [2R] and toggle the active
state of the DISC IN 1 between
GROUND and OPEN.
I/O CONFIG
¬DISCRETE IN SERIAL®
¬DISCRETE OUT GRAPHICS®
¬ARINC RECEIVE
¬ARINC TRANSMIT
º§z
¬UNILINK MENU RETURN®
NOTE: Press the NEXT or PREV key to
toggle between DISC IN OPT pages 1
and 2.