User's Manual

UL-801 Installation Manual
Page 434
23-20-06 15 December 2011
(2) Edit/Store Mode
SYS CONFIG 1/4
¬I/O CONFIG EDIT®
¬VHF CONFIG TELEPHONE®
¬SAT CONFIG POS REPORT®
¬PRIORITY REVIEW®
--:--z
¬UNILINK MENU RETURN®
NOTE: The FMS must be in an On
Ground condition while you
configure the UniLink. The data
entry field at [1R] will not be
accessible if the UniLink detects
a Weight Off Wheels condition.
SYS CONFIG 1/4
¬I/O CONFIG -----®
¬VHF CONFIG TEL CONFIG®
¬SAT CONFIG POS REPORT®
¬PRIORITY REVIEW®
--:--z
¬UNILINK MENU RETURN®
2 Push EDIT [1R]. The word EDIT is
replaced with the word STORE. Do not
push STORE [1R] again until the
configuration is complete.
NOTE: Even though the LSK displays
STORE, EDIT mode is active.
1 Push LSK [1R] to highlight
the data entry field. Type in
the password 456789 and push
ENTER. The password will be
replaced with the word EDIT
and EDIT mode is enabled.