User's Manual

UL-801 Installation Manual
Page 414
23-20-06 15 December 2011
d) ARINC TRANSMIT
NOTE:
• If any ARINC TX port is selected as 741 SDU, then SAT must be
selected as the Normal or Alternate option in the PRIORITY (SYS
CONFIG 1/4) option page.
• If an ARINC TX choice is displayed in small print and there is no arrow
pointing to an LSK that selection is not available for use.
• VOX tune bus can only be configured for one port.
ARINC TX 1/3
PORT 1
(A) Middle Plug 1A
(B) Middle Plug 1B
NOTE: Only TX port with a default.
 FMS/CDU1  FMS/CDU2  FMS/CDU3  740 PRINT
 741 SDU  VOX TUNE  VM CMC  604 CMC
 MCDU1  MCDU2  MCDU3  CVR
 702 FMS1  702 FMS2  702 FMS3  750 VDR
 TEST NOTE: Test is used by the Engineering Development
only. DO NOT CONFIGURE.
PORT 1 SPEED
 LOW NOTE: LOW is the only configurable option.
PORT 2
(A) Middle Plug 2A
(B) Middle Plug 2B
Ports 2-16 have no default settings.
 FMS/CDU1  FMS/CDU2  FMS/CDU3  740 PRINT
 741 SDU  VOX TUNE  VM CMC  604 CMC
 MCDU1  MCDU2  MCDU3  CVR
 702 FMS1  702 FMS2  702 FMS3  750 VDR
 TEST
PORT 2 SPEED
 LOW
 HIGH
PORT 3
(A) Top Plug 15A
(B) Top Plug 15B
 FMS/CDU1  FMS/CDU2  FMS/CDU3  740 PRINT
 741 SDU  VOX TUNE  VM CMC  604 CMC
 MCDU1  MCDU2  MCDU3  CVR
 702 FMS1  702 FMS2  702 FMS3  750 VDR
 TEST
PORT 3 SPEED
 LOW
 HIGH
Press NEXT. ARINC TX 2/3 displays.
PORT 4
(A) Top Plug 11A
(B) Top Plug 11B
 FMS/CDU1  FMS/CDU2  FMS/CDU3  740 PRINT
 741 SDU  VOX TUNE  VM CMC  604 CMC
 MCDU1  MCDU2  MCDU3  CVR
 702 FMS1  702 FMS2  702 FMS3  750 VDR
 TEST
PORT 4 SPEED
 LOW
 HIGH
PORT 5
(A) Middle Plug 5B
(B) Middle Plug 5C
 FMS/CDU1  FMS/CDU2  FMS/CDU3  740 PRINT
 741 SDU  VOX TUNE  VM CMC  604 CMC
 MCDU1  MCDU2  MCDU3  CVR
 702 FMS1  702 FMS2  702 FMS3  750 VDR
 TEST
PORT 5 SPEED
 LOW
 HIGH