User's Manual

UL-801 Installation Manual
Page 408
23-20-06 15 December 2011
b) DISCRETE (DISC) OUT
FANS VISUAL
Output – Active Open or Active Ground configurable.
Use any available discrete output pin and configure accordingly.
The FANS VISUAL output discrete activates the ATC annunciator and
alerts the crew that an ATC advisory is active and the UniLink pages should
be accessed to view further information.
FANS AURAL
Output – Active Open or Active Ground configurable. Duration is
configurable.
Use any available discrete output pin and configure accordingly.
The FANS AURAL output discrete activates the aural warning device and
alerts the crew that an aural message has been received.
CPDLC CNECT (Connect)
Output – Active Open or Active Ground configurable.
Use any available discrete output pin and configure accordingly.
The CPDLC CNECT output discrete activates an optional CPDLC CNECT
annunciator while the UniLink is connected to the Current Data Authority
(CDA).
If the CDA connection is disrupted or lost, the optional CPDLC CNECT
annunciator deactivates.
The New Message (NEW MSG) discretes are provided to drive visual
indications of new/unread uplinks. Active state indicates a new/unread uplink
exists.
The CHIME discretes are provided to drive aural indications of new/unread
uplinks. Active state indicates a new/unread uplink exists.
VHF/SAT/TEL NOCOMM discretes are provided to drive visual indications
media link states. Active state indicates a particular medium is in NOCOMM
(link not established).
DISC OUT 1/5
DISC OUT 1
Top Plug 10D
NOT USED
VOX ANNUN NEW MSG 1 NEW MSG 2
VHF NOCOMM SAT NOCOMM TEL NOCOMM VDR VOX SEL
CHIME 1 CHIME 2 FANS VISUAL FANS AURAL
CPDLC CNECT
ACTIVE STATE
GROUND
OPEN
DISC OUT 2
Middle Plug 8A
NOT USED
VOX ANNUN NEW MSG 1 NEW MSG 2
VHF NOCOMM SAT NOCOMM TEL NOCOMM VDR VOX SEL
CHIME 1 CHIME 2 FANS VISUAL FANS AURAL
CPDLC CNECT
ACTIVE STATE
GROUND
OPEN