User's Manual

UL-801 Installation Manual
Page 405
23-20-06 15 December 2011
2. Configuration Worksheets
Universal Avionics Systems Corporation recommends that the following worksheets be
completed in order to assist with configuring the UniLink Configuration Module. One set of
worksheets should be filled out and a copy given to the customer. Fill in the blanks and
check the appropriate boxes based on the wiring of the aircraft and its set of avionics
components. Further, these worksheets may be submitted along with other approval
paperwork. A copy of these worksheets should be filed along with the aircraft paper work for
future reference.
NOTE:
• A customer database is installed in each UniLink.
• You are hereby authorized to reproduce these worksheets as well as the
configuration module programming procedures if desired.
• It is recommended that the current UniLink configuration be recorded prior
to updating to a new UniLink software version. UniLink may not maintain
previous configuration settings with a software upgrade.
The default value for each option in the worksheets is underlined. Pressing the RETURN
LSK returns you to the menu from which you started.
UniLink input consists of one of the three following character types. Where necessary, each
field on the worksheets designates which type to use.
Types of character input allowed
Alpha
Shown as “A” on the worksheets.
Alpha characters are the 26 characters of the
alphabet.
Numeric
Shown as “N” on the worksheets.
Numeric characters consist of the numbers 0 to 9.
Alphanumeric
Shown as “AN” on the worksheets.
Alphanumeric characters are a combination of
letters (including both upper and lower case) and
numbers. Alphanumeric input can also contain
punctuation marks, and mathematical and other
conventional symbols (such as @, &, and *).