User's Manual

UL-801 Installation Manual
Page 332
23-20-06 15 December 2011
Q. UL-801 to EFI-890R – High Resolution
#1 NAV DISPLAY
(P/N 8904-XXXXX-XX)
UL-801
(P/N 10801-XX)
TP
A
B
#2 NAV DISPLAY
(P/N 8904-XXXXX-XX )
1
RS-422 DISPLAY
DATA TX #4
7A
7D
7C
7B
4
2
6D
6C
6A
6B
3
4
1
SELECT ANY AVAILABLE RS-422 PORT AND CONFIGURE THE PORT FOR HI-RES DISPLAY 1. PORT #4 IS USED HERE AS AN EXAMPLE.
USE ANY AVAILABLE RS-422 PORT. PORTS DEPICTED ARE FOR EXAMPLE.
EFI-890Rs ARE HIGH RESOLUTION DEVICES, ONE DEVICE MAXIMUM PER PORT. THEREFORE, THE UNILINK MUST BE CONFIGURED AS DEFINED
BELOW. A MAXIMUM OF TWO HIGH-RESOLUTION DISPLAYS CAN BE INSTALLED AND CONFIGURED.
4
2
3
SELECT ANY AVAILABLE RS-422 PORT AND CONFIGURE THE PORT FOR HI-RES DISPLAY 2. PORT #5 IS USED HERE AS AN EXAMPLE.
SELECT SERIAL
PORT 4 SELECT HI-RES DISPLAY 1
PORT 5 SELECT HI-RES DISPLAY 2
RS-422 RX CHANNEL MENU
J1-16, J1-27(A,B) RX FUNCTION: UNILINK 700 PRIMARY 38.4
J1-16, J1-27(A,B) RX NUMBER: SYSTEM 1
RS-422 TX CHANNEL MENU
J1-47, J1-46(A,B) TX FUNCTION: UNILINK 700 38.4
UNILINK NODE ID: 35
I/O CONFIG:
UNILINK CONFIGURATION
GRAPHICS CONFIGURATION
CDU/MFD BAUD RATE SELECT 19.2 KBS
CDU1 GRAPHICS DISPLAY ON SELECT CDU, HR1
CDU2 GRAPHICS DISPLAY ON SELECT CDU, HR2
EFI-890R ND #1 CONFIGURATION MAIN MENU
RS-422 RX CHANNEL MENU
J1-16, J1-27(A,B) RX FUNCTION: UNILINK 700 PRIMARY 38.4
J1-16, J1-27(A,B) RX NUMBER: SYSTEM 1
RS-422 TX CHANNEL MENU
J1-47, J1-46(A,B) TX FUNCTION: UNILINK 700 38.4
UNILINK NODE ID: 45
EFI-890R ND #2 CONFIGURATION MAIN MENU
RETURN/SHIELD
RS-422 TX
RS-422 RX
RETURN/SHIELD
RETURN/SHIELD
RS-422 TX
RS-422 RX
RETURN/SHIELD
2
P1
P1
RS-422 DISPLAY
DATA RX #5
RS-422 DISPLAY
DATA TX #5
RS-422 DISPLAY
DATA RX #4
A
B
A
B
A
B
A
B
A
B
A
B
A
B
27
47
46
16
27
47
46
16
EXAMPLE 1 EXAMPLE 2
CDU1 GRAPHICS DISP ON CDU1 GRAPHICS DISP ON
CDU, RCDU, HR1 CDU, FPCDU, HR1
CDU2 GRAPHICS DISP ON CDU2 GRAPHICS DISP ON
CDU, HR2 CDU, HR2
CDU3 GRAPHICS DISP ON CDU3 GRAPHICS DISP ON
CDU
ANY ADDITIONAL SELECTIONS WILL RESULT IN AN ERROR MESSAGE.