User's Manual

UniLink UL-800/801

Operator’s Manual

23-20-06.01

December 2011

NOTE: This image will display on an EFI-890R or MFD if installed

and configured.

To exit the image, press RTN, LSK [5R].The display returns to the

TESTS page (NEW WX MAP and ADVISORY are no longer

displayed).

UniLink Self-Test

Menu Navigation: UNILINK MENU(2/2 > MAINTENANCE > TESTS > SELF-

TEST

Selection of SELF-TEST, LSK [3L] places the system in a power up

test mode.

When the test is selected a pop-up window requesting to CONFIRM

or CANCEL the test is displayed. Selecting CANCEL closes the pop-

up window and returns to the current display. Selecting CONFIRM

reboots UniLink. The message UNILINK/FMS COMM ERROR

RESELECT UNILINK is displayed. During the period of reboot, the

UNILINK displayed on the CDUMCDU is not selectable. When the

test is complete, UNILINK will be selectable. Selecting UNILINK will

display UNILINK MENU page 1/2.

PTT (Push-To-Talk) (UL-801 only)

Menu Navigation: UNILINK MENU 2/2 > MAINTENANCE. > TESTS > PTT

If available, this test commands the radio to transmit for 3 seconds. A

pop-up window PTT TEST IN PROGRESS will display for 3 seconds.