User's Manual

UniLink UL-800/801
Operator’s Manual
23-20-06.01 75
December 2011
Printer Test
Menu Navigation: UNILINK MENU (2/2) > MAINTENANCE > TESTS >
PRINTER
If a printer is connected and configured, selection of PRINTER, LSK
[1L] will send test message text to the printer. If there is no printer
configured, the PRINTER option will not be displayed.
When PRINTER is selected, a pop-up window PRINTER TEST IN
PROGRESS” is displayed. When complete, the pop-up window is no
longer displayed.
The following will be printed:
THIS IS NOT AN UPLINK. THIS IS AN INTERNALLY
GENERATED PRINTER TEST MESSAGE. !"#$%&'()*+,-
./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`
{|}~;
Image Test
Menu Navigation: UNILINK MENU 2/2 > MAINTENANCE > TESTS > IMAGE
Selection of IMAGE, LSK [2L] is used to display a test image. While
the test image is being displayed, any key push will cause the display
to return to the MAINTENANCE page. Image Test is not available
when the aircraft is in the air.
When IMAGE is selected, a pop-up window with the message IMAGE
TEST IN PROGRESS will display. When the test is complete, an
ADVISORY will display on the CDU and NEW WX MAP is displayed
adjacent LSK [5L] (LSK for MCDU may be different).
Press NEW WX MAP, LSK [5L] to display the generated test weather
image. A test weather map will display with the title IMAGE BUS
TEST.