User's Manual

UniLink UL-800/801
Operator’s Manual
72 23-20-06.01
December 2011
5. Press the LSK adjacent the appropriate reason and return to the
SITUATION page. If no selection is made, the REASON field will
default to NONE.
6. Press the SEND LSK to place the report in queue for
transmission.
POS REPORT
Menu Navigation: UNILINK MENU 2/2 > POS REPORT
The POS REPORT page is used to modify Position Report data prior
to sending, and to enable and disable the Auto Position report (AUTO)
function.
Data on this page is prefilled FMS/ADC data. Normally this data will
be valid for the Position Report; however, temporary manual entries
are possible for the current manually initiated transmission only.
To make the report:
1. Press POS REPORT, LSK [3R] from UNILINK MENU page 2/2.
The POS REPORT page will display.
2. With TO WPT active, enter a waypoint name and press [ENTER].
3. The TO WPT ETA (LSK [2L]) is supplied by the FMS. To change,
if not active, press and enter up to four digits (Time is UTC time).
Press [ENTER].
4. If not active, press GROUNDSPEED, LSK [3L] and enter up to
three digits. Press [ENTER].
5. If not active, press WINDS, LSK [4L] and enter three digits for
wind direction. Press [ENTER] to advance the cursor to the
velocity field and enter up to three digits. Press [ENTER].